mysite
RELAXATION STATION SWIMMING POOL TABLE AND STOOLS
• Tilting table base for pools with sloped shallow ends.
• Adjustable Height Stools with footrests and Table Extensions.
• The table and seat bases come with anti-slip pads for use in fiberglass and vinyl liner pools.
• 18″ NEW Super heavy-duty tabletop
• 4 Jumbo cupholders (large enough for the foam koozies and most large tumblers) to keep your drinks in the table, not in the pool.
• UV Resistant Materials
• Quick set-up
• No Drilling in your pool deck
• Tables with Stools or No Stools are available.
• Portable design lets you bring them in and out of your pool for cleaning or storage.
• Additional supplies you will get=80lb bag of concrete per base. For example; A No Stool set requires one 80 lb bag of Quikrete or Sakrete. A 4-stool set with a table will require FIVE 80lb bags, or 400 lbs worth of bagged concrete.
• Table support rods are 52″ tall and now come with a 6 inch extension for a total of 60″ height. You will want to have the waterline 6″ below the table height, so a 60″ table will work in water up to 54″ deep.
QA
Q) What pool depth will The Relaxation Station work in?
A) The adjustable stool set comes with 2 adjustable height stools and a 6″ table extension. This set will work in depths up to about 54″ deep. Stools are adjustable from 23.5 to about 32″ high.. The standard stools are ideal for depths from 30″ to 45″. The stools are designed for you to be in the water from upper stomach to chest deep. If you have them set too high they will be less stable.
We recommend using our adjustable height umbrellas with this set so the height of the umbrella can be lowered to the needed height. Non-adjustable height umbrellas may be too tall to work properly and may lead to tipping.
Q) How much weight will the stools hold and how tall are they?
A) The stools are tested for adults that weigh up to 275 lbs in the water, The stools adjust in height from about 23.5″ to about 32″ tall. The seat tops are 11.5″ wide.
Q) How Tall tall is the table?
A) The Table is adjustable from 12″ high to 60″ high. We recommended this set for pools with a shallow end of 54″ or less so the cupholders are not underwater.
Q) How do I fill the bases with concrete?
A) To fill the bases with concrete: All you need is an 80lb bag (per base) of all-purpose concrete to fill the bases and you are ready to go. If the bags are 80 lb bags, you will just have extra concrete left over that can be used to fill the next base. With the seat post or table support post installed in the base, you will want to fill the bases by scooping the dry mix from the bag with an old plastic cup and pouring it into the hole in the base. Concrete is added to the bases dry and then saturated with water so they can harden. You will just want to slowly add water to the bases until they are fully saturated with water. Then you let them sit and harden on a flat surface. If there are still some dry areas of concrete in the base water from the pool will saturate the rest of the base when used.